Bahauddin Zakariya University, Multan

Department of Mechanical Engineering

Head of Department: Prof. Dr. Muhammad Tahir Hassan
Official Contact No.: 061-9210191
Official Email Address: chairmanmed@bzu.edu.pk
Departmental Student Advisor: Engr. Rauf Ahmad
Departmental Examination Incharge: Dr. Mustabshirha Gul

Departmental News, Media & Upcoming Events

Interviews for Hiring of Lab Engineers on Visiting Basis for Fall Semester 2024

Admissions Open in M.Sc. Mechanical Engineering

Admissions Open for Fall 2024

Industrial Tour to D.G. Khan Cement Company, Khairpur Plant, Kallar Kahar

Funfair 2024

Faculty

Prof. Dr. Muhammad Tahir Hassan	Professor
Prof. Dr. Farrukh Arsalan Siddiqui	Professor
Dr. Shazia Noor	Assistant Professor
Engr. Dr. Syed Asad Raza Gardezi	Assistant Professor
Engr. Abdul Bari	Assistant Professor
Engr. Akhlaq Ahmad	Assistant Professor
Dr. Naveed Husnain	Assistant Professor
Dr. Muhammad Jamshaid	Assistant Professor (OPS)
Dr. Akbar Ali Qureshi	Assistant Professor
Engr. Abdul Bari Farooq	Lecturer
Dr. Mustabshirha Gul	Lecturer
Dr. Muhammad Farhan Hanif	Assistant Professor (OPS)
Engr. Muhammad Farooq Zaman	Lecturer
Engr. Rauf Ahmad	Lecturer

Introduction

As per the vision of Punjab government and after approval from Executive Committee of National Economic Council (ECNEC) in 1990, the Mechanical Engineering Department (MED) was established in 2004 as a part of University College of Engineering and Technology. At the time of its inauguration, it was the only department which was offering B.Sc. Mechanical Engineering in the region of South Punjab.

Initially, program was being assessed on annual basis, later on Term System and finally Semester System was adopted. In view of latest advancement of education system, the Department has successfully adopted the Outcome Based Education (OBE) System within the semester system. Now the degree of B.Sc. Mechanical Engineering is accredited by Pakistan Engineering Council (PEC) at Level-II in conjunction with Washington Accord.

MED has total 14 permanent faculty members out of which 09 faculty members are Ph.D. degree holders whereas 03 other faculty members are enrolled in Ph.D. programs. Moreover, MED has 05 Lab Engineers to facilitate the students on hand-on experience of latest Mechanical Engineering equipment and software.

The curriculum of the MED is designed in view of latest requirements of the field with state-of-the-art laboratory facilities as well as the criteria of HEC and PEC having the courses of Thermal Power, Design, Manufacturing, Engineering Mechanics, Robotics and Automation along with Inter-disciplinary, Natural Sciences and Management Courses to equip its students with the latest tools of Mechanical Engineering.

Moreover, MED has started Postgraduate program (M.Sc. Mechanical Engineering) in 2021. M.Sc. Mechanical Engineering program is designed to promote the research culture. The core purpose of this research-based program is to provide solutions for various problems of world-wide engineering society. The department is expected to commence its Ph.D. program soon.

UNIVERSITY VISION:

Bahauddin Zakariya University, Multan as flagship Institution of the South Punjab imparts informed education at all levels of Undergraduate to PhD by diverse world-views and paradigms, grounded in diverse traditions and indigenous culture and heritage. Make their Graduates leading luminaries with professional approach to preserve, disseminate and execute knowledge.

UNIVERSITY MISSION:

·  To be an internationally acclaimed University, recognized for excellence in teaching, research and outreach; provide the highest quality education to students, nurture their talent, promote intellectual growth and shape their personal development.

·    To enhance our reputation as a world-class teaching and research institution which is recognized for its innovation, excellence and discovery, and attracts the best students and staff.

·         To develop aptitude and skills of students to equip them to face the challenges and needs of fast changing society.

·         To promote educational programmes in various disciplines to develop synergistic interaction with society and industry.

·         Producing employable and ready to job graduates by using all forms of general and professional education.

MED VISION:

The Department of Mechanical engineering is expected to develop students to be immensely innovative in research and to play vital role for advancement in the field of engineering & technology.

MED MISSION:

The department of Mechanical Engineering aspires to develop its students to be innovative and productive engineers for the development of better atmosphere for humanity.

PROGRAMME EDUCATIONAL OBJECTIVES (PEOs) OF MED:

PEO–1: To equip students with the knowledge of Mechanical Engineering and Mathematics essential for solving problems and for the product development using modern tools related to the field.

PEO–2: To make students able to generate ideas and work on theory to solve and effectively communicate problems, individually as well as collectively.

PEO–3: To equip students with the knowledge of research and development for managing practical problems related to the Mechanical Engineering during their professional career.

PEO–4: To impart students with ethical norms and social values for their positive impact towards the development of society and of environment.

PROGRAMS LEARNING OUTCOMES (PLOs):

The PLOs are given below:

PLO 1 (GA1): ENGINEERING KNOWLEDGE

An ability to apply knowledge of mathematics, science, engineering fundamentals and an engineering specialization to the solution of complex engineering problems.

PLO 2 (GA2): PROBLEM ANALYSIS

An ability to identify, formulate, research literature, and analyze complex engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences and engineering sciences.

PLO 3 (GA3): DESIGN /DEVELOPMENT OF SOLUTIONS

An ability to design solutions for complex engineering problems and design systems, components or processes that meet specified needs with appropriate consideration for public health and safety, cultural, societal, and environmental considerations.

PLO 4 (GA4): INVESTIGATION

An ability to investigate complex engineering problems in a methodical way including literature survey, design and conduct of experiments, analysis and interpretation of experimental data, and synthesis of information to derive valid conclusions.

PLO 5 (GA5): MODERN TOOLS USAGE

An ability to create, select and apply appropriate techniques, resources, and modern engineering and IT tools, including prediction and modeling, to complex engineering activities, with an understanding of the limitations.

PLO 6 (GA6): THE ENGINEER & SOCIETY

An ability to apply reasoning informed by contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to professional engineering practice and solution to complex engineering problems.

PLO 7 (GA7): ENVIRONMENT & SUSTAINABILITY

An ability to understand the impact of professional engineering solutions in societal and environmental contexts and demonstrate knowledge of, and need for, sustainable development.

PLO 8 (GA8): ETHICS

Apply ethical principles and commit to professional ethics and responsibilities and norms of engineering practice.

PLO 9 (GA9): INDIVIDUAL & TEAM WORK

An ability to work effectively, as an individual or in a team, on multifaceted and /or multidisciplinary settings.

PLO 10 (GA10): COMMUNICATION

An ability to communicate effectively, orally as well as in writing, on complex engineering activities with the engineering community and with society at large, such as being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.

PLO 11 (GA11): PROJECT MANAGEMENT

An ability to demonstrate management skills and apply engineering principles to one’s own work, as a member and/or leader in a team, to manage projects in a multidisciplinary environment.

PLO 12 (GA12): LIFE-LONG LEARNING

An ability to recognize the need for, and have the preparation and ability to engage in, independent and life-long learning in the broadest context of technological change .

These PLOs have also been published on notice boards.

MAPPING OF VISION AND MISSION TO PEOs:

 

MAPPING PEOs TO PLOs:

Programs Offered

The following programs are being offered:

B.Sc. Mechanical Engineering	Undergraduate Program
Eligibility: ELIGIBILITY REQUIREMENTS FOR B.Sc: An applicant for admission in Mechanical Engineering must fulfill the following eligibility requirements: He should have passed the Intermediate (Pre-Engineering) Examination with Chemistry, Mathematics and Physics from a Board of Intermediate and Secondary Education of Punjab, Federal or an equivalent examination recognized by the University. Admission in B.Sc Engineering Program will be given on F.Sc Part-I Result. Admission will be confirmed on 60% Marks in F.Sc Result. GENERAL ELIGIBILITY REQUIREMENTS: An applicant for admission in Mechanical Engineering must fulfill the following requirements: a) He should have obtained at least 60% marks in examination on the basis of which he seeks admission. Marks for Hafiz-e-Quran (where applicable) shall be added only for determination of merit. b) He should be a bonafide resident of the area from where he seeks admission. c) He should meet standards of physique and eye-sight laid down in the medical certificate. d) He must have appeared in the Entry Test for Session 2024 arranged by the University of Engineering & Technology Lahore, Pakistan or BZU Test for Session 2024. CRITERIA FOR DIPLOMA HOLDERS: The Admission of relevant Diploma Holders in Engineering Program will be dealt on the basis of decision of Honorable Supreme Court of Pakistan and Pakistan Engineering Council. The candidate should have passed diploma examination of a Board of Technical Education in the Mechanical technology with minimum 60% aggregate marks. b) Applicants seeking admission in B.Sc. Mechanical Engineering must have Diploma in Mechanical Technology. A candidate having diploma in any other technology shall not be eligible for admission. The admission of all eligible diploma holders in a specific discipline will be purely based on merit. PROVISIONS ABOUT ADMISSION ON THE BASIS OF A B.SC. DEGREE: a) For admission to the B.Sc. Engineering, an applicant must have passed the B.Sc. examination with Mathematics and Physics. b) A person possessing a B.Sc. degree is NOT eligible for admission to any Bachelor’s Engg. Degree Program at the Faculty unless he has also passed F.Sc. (Pre-Engineering or Pre-Medical) examination with Add Math with 60% Marks. Merit Determination: ELIGIBILITY REQUIREMENTS FOR B.Sc: An applicant for admission in Mechanical Engineering must fulfill the following eligibility requirements: He should have passed the Intermediate (Pre-Engineering) Examination with Chemistry, Mathematics and Physics from a Board of Intermediate and Secondary Education of Punjab, Federal or an equivalent examination recognized by the University. Admission in B.Sc Engineering Program will be given on F.Sc Part-I Result. Admission will be confirmed on 60% Marks in F.Sc Result. GENERAL ELIGIBILITY REQUIREMENTS: An applicant for admission in Mechanical Engineering must fulfill the following requirements: a) He should have obtained at least 60% marks in examination on the basis of which he seeks admission. Marks for Hafiz-e-Quran (where applicable) shall be added only for determination of merit. b) He should be a bonafide resident of the area from where he seeks admission. c) He should meet standards of physique and eye-sight laid down in the medical certificate. d) He must have appeared in the Entry Test for Session 2024 arranged by the University of Engineering & Technology Lahore, Pakistan or BZU Test for Session 2024. CRITERIA FOR DIPLOMA HOLDERS: The Admission of relevant Diploma Holders in Engineering Program will be dealt on the basis of decision of Honorable Supreme Court of Pakistan and Pakistan Engineering Council. The candidate should have passed diploma examination of a Board of Technical Education in the Mechanical technology with minimum 60% aggregate marks. b) Applicants seeking admission in B.Sc. Mechanical Engineering must have Diploma in Mechanical Technology. A candidate having diploma in any other technology shall not be eligible for admission. The admission of all eligible diploma holders in a specific discipline will be purely based on merit. PROVISIONS ABOUT ADMISSION ON THE BASIS OF A B.SC. DEGREE: a) For admission to the B.Sc. Engineering, an applicant must have passed the B.Sc. examination with Mathematics and Physics. b) A person possessing a B.Sc. degree is NOT eligible for admission to any Bachelor’s Engg. Degree Program at the Faculty unless he has also passed F.Sc. (Pre-Engineering or Pre-Medical) examination with Add Math with 60% Marks. Scheme of Study Link: Click Here to View/Download Scheme of Study of B.Sc. Mechanical Engineering Program
M.Sc. Mechanical Engineering	Graduate (MS) Program
Eligibility: B.Sc Mechinical Engineering B.Sc Mechatronics Engineering B.Sc Industrial & Manufacturing Engineering Merit Determination: According to the University policy.